• Women skiers, this is the place for you -- an online community without the male-orientation you'll find in conventional ski magazines and internet ski forums. At TheSkiDiva.com, you can connect with other women to talk about skiing in a way that you can relate to, about things that you find of interest. Be sure to join our community to participate (women only, please!). Registration is fast and simple. Just be sure to add webmaster@theskidiva.com to your address book so your registration activation emails won't be routed as spam. And please give careful consideration to your user name -- it will not be changed once your registration is confirmed.

Completing your turns

However, an exercise that's great for beginner bump skiers is to head straight down the fall line pivoting skis to point all the way left then all the way to the right, using the sideways-pointing skis to keep the downhill travel at a snail's pace or even slower. A most excellent task to master. Still, this exercise involves the skier doing pivot slips, not turns.
I failed to point out that this excellent exercise is to be done in the bumps. Start in easy "baby" sized bumps.
 
@liquidfeet thank you for the shout out as I missed this new thread you wanted to start. I love where the conversation is going.

May I ask why you don't consider a pivot slip a turn? If a change of direction is the definition, a case could be made that travel is aling the fall line in a straight line, the skis do change direction. I only ask because I could picture a drill alternating carved, skidded and pivot slipped turns and in my mind they all achieve the change of direction regardless of travel across the hill. Thoughts?

Back to main topic at hand, turn completion. I usually teach it very early in a lesson with intermediate through expert skiers (assuming of course that the concept is new to them) as it is part of my approach to helping them with speed control. Specifically, it will fall into the speed control through turn shape skill, versus turn size or friction.

I like how well the diagram posted earlier shows what a completed turn looks like, but at the risk of seeming nitpicky, the drawing to me, seems to show too much time in the transition. Once again, being pedantic, but if that is the oath of travel of the feet rather the full length of the skis there is a ling time spent going across the hill, which is often a different challenge for skiers hunting to scrub speed, who then loose all their momentum.

I have a few different ways to explain the concept, often drawing semi circles on the snow or clockfaces.

Personally, I am not sure that there is a specific spot on a circular path that is "the" spot where the turn is deemed to be properly finished. I find that it really depends on the desired path, speed, conditions etc... Though for most discussions thr bottom end of a perfect semi circle oriented top to bottom probably would the agreed upon spot. But what slope is perfect? I even think of teaching this in a half pipe.whuch I have done where the top and bottom changes constantly.

That being said, if I am heard encouraging a student to complete their turn it does usually mean that they started their next turn too early along a semi circular path to achieve desired speed control.

I often teach skiers to go past the bottom of the circle and continue turning to help with the concept of continuing to turn to complete the turn.

Personally, the joy of figuring out how to complete a turn was rapidly followed by the frustration of loosing too much speed and energy, and figuring out how to carry that into the start of the new one, while still actually turning.

Skiing! Endless brain gym challenges.
 
May I ask why you don't consider a pivot slip a turn? If a change of direction is the definition, a case could be made that travel is aling the fall line in a straight line, the skis do change direction. I only ask because I could picture a drill alternating carved, skidded and pivot slipped turns and in my mind they all achieve the change of direction regardless of travel across the hill. Thoughts?
An orthodox pivot slip does not travel left-right. The skier goes straight down the fall line. This is challenging to do and why so many skiers have difficulty doing pivot slips. They keep traveling left and right.

This is why I've always heard that pivot slips, properly done without left-right travel, don't create turns. They create a fancy skidded straight run. There is no change of direction of travel. Just change in direction of where the skis point. But I'd be happy to call them turns anyway.
 
Welcome to the forum, @Ekmc2.
--Are you interested in thinking technically about skiing?
--Where do you ski?
Thank you! This past year I had the Epic Pass and skied Heavenly, Northstar, and Park City. Almost all of my skiing has been in Tahoe, but I moved to Southern California this spring, so Tahoe is not as convenient as it was when I lived in the Bay Area. I am always up for trying new places, though.

I would love to think more technically about skiing. My issue is that once I am actually on the mountain, muscle memory kicks in and it is hard for me to remember everything while I am skiing.

I am also curious if anyone knows why I would feel more comfortable skiing on ice than in powder. Does that usually point to a specific technique issue?

For context: I have been skiing since I was 6 and I am 44 now. I am 5’2”, around 130–140 lbs, and I ski 153 cm Salomon QST Lux 92s with Salomon boots around 85 or 90 flex.

In powder, my calves burn out quickly. Utah powder actually felt harder to me than Tahoe. I tend to make short turns and Z-shaped turns, including on steep groomers, and I know I have a tendency to lean back. When I try to make larger, rounder turns, I feel out of control.

I am very open to feedback and would appreciate any thoughts on what this might indicate technically.
 
You've been skiing since you were 6 (like me too), but where did you learn to ski? East? If so that could be while you "like" ice. It's definitely my comfort zone.

My first comment is that I think your Lux's are too short. They are just about the same length as your height. If you get a chance this season, try a similar ski in 160.

Leaning back on steep slopes is a fear reaction and you will need to understand that keeping forward and centered will make skiing those easier. It will take time, we've all been there and sometimes go back there!! This "centered stance" will help you in moguls too.

I'll let someone with more experience instructing in powder to comment on your issue there.
 
I am also curious if anyone knows why I would feel more comfortable skiing on ice than in powder. Does that usually point to a specific technique issue?

For context: I have been skiing since I was 6 and I am 44 now. I am 5’2”, around 130–140 lbs, and I ski 153 cm Salomon QST Lux 92s with Salomon boots around 85 or 90 flex.
Welcome!

Having observed folks from New England react to a deep powder storm in Utah and elsewhere, your reaction is very common for people with little experience with deep powder. The contrast is that midwest skiers get to ski lake effect snow that can be 10+ inches overnight and dry powder so they aren't as intimidated looking down a long powder run in Utah/Colorado. To have fun skiing powder over 6 inches deep, can't go slow. Also need to be comfortable with skis/boots IN the snow, not ON the snow so the fresh snow needs to be fluffy (dry), not dense (wet).

I'm over 65 and more on the petite side, 5'0", 112 lbs. Having become a solid advanced skier in the last decade (lessons made a big difference), my all-mountain skis these days are 85 underfoot and 159cm. While your skis are a good width, they are too short for powder even 4 inches deep. 15-20 years ago when I had less experience with powder, I would rent fat skis that were 95-105 underfoot and 160-166cm for the rare powder day. The powder skis I bought from a Utah Diva a while back are 106 underfoot @158cm.

I travel from the east coast for big mountain skiing and must get very lucky with weather given that my ski trips are planned months in advance. Have only used my powder skis in fresh snow about ten times in the last six seasons. What was more interesting last season was to find that I can carve the wide skis in a way that wasn't possible when I bought them. The last couple seasons the semi-private lessons I did with friends tended to be more about carving than powder turns because of snow conditions.

FYI, my favorite instructor at Alta doesn't want someone lucky enough to get a powder lesson to have skis over 100mm wide. A decade ago I would get the DPS Nina 99 @158cm when I had a powder lesson with him. More recently I had a semi-private lesson on a powder day together with a ski buddy (also from the east) who is 6'4". The instructor still didn't want him to have skis wider than 100mm. Wider skis do make it easier but the idea of the lesson was to learn technique, not just rely on ski design.
 
! So only the leftmost turn in this diagram is complete, right?
I love @liquidfeet 's diagram too. But I understood it to mean that all of the turns are completed turns, just with different degrees. Short turns can also be complete turns. In fact, if I understand my instructors in this discussion thread, the aim is to pretty much always complete turns (unless doing bumps) is that right? I certainly have trouble. I often revert to z-turns, and the most common feedback I get is that I'm either leading with my shoulders or not completing my turns. I think I have trouble translating it from a mental concept to a physical understanding.
 
I love @liquidfeet 's diagram too. But I understood it to mean that all of the turns are completed turns, just with different degrees. Short turns can also be complete turns. In fact, if I understand my instructors in this discussion thread, the aim is to pretty much always complete turns (unless doing bumps) is that right? I certainly have trouble. I often revert to z-turns, and the most common feedback I get is that I'm either leading with my shoulders or not completing my turns. I think I have trouble translating it from a mental concept to a physical understanding.
In one way any turn beyond a straight line is completed as soon as a new one starts. I think that his specific conversation is focusing more on the idea specific to skiing where so many skiers, for a variety of reasons, start their new one before their skis had a chance to truly come across the slope perpendicular to the fall line before the new one starts.

Ideally the transition from turn to turn is just a ski length where the skis leave a perfectly flat mark in the snow. In a finished turn, as it is being described in this thread, that flat ski track would be at 90 degrees, perfectly across the hill, in a carved turn. Essentially, the track should look like a perfect semi circle not a partial one, one stretched out one.

Is this turn shape appropriate or realistic on most runs, certainly not. Is it a goal to work towards, I think so. The one place where it is very much relevant is in figure 8 ski competitions where the tracks should form perfect semi circles. However, they don't. Not even close.

The rest of the time, most turns won't look quite so perfect as skiers adjust for gate spacing in a race course, human obstacles on a run, bumps, etc....

In terms of body sensations and movements we create, what helped me was to think of never rushing any one part of the turn yet also never being static. In a Z turn, I often rush the direction change then hang out right after I complete that change. I often start the turn too late and compensate by moving too fast into the new one. Making sure that the skis come into a position where they are not longer facing down the hill when I start the new one, allows me to slow down enough, that I can actually start the new turn earlier, rather than using a skid to slow down more and still feeling like I am speeding when I start a new one.

I have no idea if that made sense as showing is way easier than writing about it.
 
Last edited:
They are all completed turns. The different is the speed and more likely the pitch. On green runs, you don't pick up excessive speed, but moving to blues/reds and black then a more short turn shape like the first, less speed is needed.

Tighter completed turns take a lot of effort. You are controlling the speed by actively carving, steering and controlling the pressure built up in the ski. Some skiers have a fear of speed and that short moment when they are heading down the fall line freaks them out. Next thing a braking Z. Relax, let it flow.

As always, try making the C shape, tighter turn, on a gentle slope. Get the feeling first, before you attempt it on a steeper run.
 
In fact, if I understand my instructors in this discussion thread, the aim is to pretty much always complete turns (unless doing bumps) is that right?
In steep bumps, better be completing the turn before starting the next one! I'm thinking about skiing bumps as 3D terrain as a recreational skier, not trying to find a competition bump line straight down the fall line going as fast as possible.

One of the Taos instructors I did Private Ski Weeks with taught me and my friends how to ski bumps at "3 miles an hour." The drill we did every time we were heading past Whistlestop (mid-mountain lodge) was a specific type of J-turn to simulate how to finish a turn in big ugly bumps and how to start the next one.
 
I don't think my instructors at Alta and Wolf Creek would say that. However, certainly need to keep up speed in deep powder (8+ inches of fluffy snow), which means doing pretty narrow turns. When practicing in a narrow corridor, need to complete the turns to avoid increasing speed by being in the fall line all the time. Want to go fast, but in a controlled manner that allows flexibility to make adjustments on the fly.
I am a bit at a loss. A completed turn in a narrow corridor is the slowest possible turn, which seems like it would fight the idea of needing to maintain some speed to move through the powder which acts as a physical break.

When I read narrow turns, I assume you mean more shallow as in less completed or finished if we were to look at the tracks? Those tracks would be in a narrow corridor but very little of that track would show the skis perpendicular to the slope, more in the fall line?

I suspect that we are envisioning the same types of turns, but using the language slightly differently, which is why this thread is interesting as it illustrates how differently people understand a concept, and the dangers for instructors of assuming that we share the same understanding of a word or concept.

I often have this conversation in regards to the apex of the turn which PSIA uses and most engineers and motorcycle racing enthusiasts will argue is a misuse of the term as it relates to skiing done on an open run without edges setting the turning space. Not even racing gates does the term apex apply quite correctly.
 
They are all completed turns. The different is the speed and more likely the pitch. On green runs, you don't pick up excessive speed, but moving to blues/reds and black then a more short turn shape like the first, less speed is needed.

Tighter completed turns take a lot of effort. You are controlling the speed by actively carving, steering and controlling the pressure built up in the ski. Some skiers have a fear of speed and that short moment when they are heading down the fall line freaks them out. Next thing a braking Z. Relax, let it flow.

As always, try making the C shape, tighter turn, on a gentle slope. Get the feeling first, before you attempt it on a steeper run.
The idea of "Relax, let it flow" matches up with what Arthur was saying during the last teaching run I had on a blue groomer last April at Alta. It was late afternoon when the groomer snow was pushed around and felt dangerous. The Sugarloaf lift had stopped for the day so we didn't have to worry about any other skiers. The snow conditions meant that going fast was not a good idea.
 
I am a bit at a loss. A completed turn in a narrow corridor is the slowest possible turn, which seems like it would fight the idea of needing to maintain some speed to move through the powder which acts as a physical break.

When I read narrow turns, I assume you mean more shallow as in less completed or finished if we were to look at the tracks? Those tracks would be in a narrow corridor but very little of that track would show the skis perpendicular to the slope, more in the fall line?
Yeah, probably shouldn't have written "narrow turn" and stuck with "narrow corridor" going at speed in deep powder. Is the usual terminology "short turn"?

What I know is that trying to do "medium round turns" in deep powder isn't the best idea . . . having tried that over the years before I was aware enough to really understand the ideas instructors were working on during a powder lesson.

I'm a visual learner. While I can take in more words from an instructor these days, I usually avoid writing about technique. Found out years ago that reading about technique is not that helpful for me to learn something new. However, reading about technique that seems related to what I've learned from instructors can be helpful.
 
@marzNC In my mind, only one point of view, a similar semi circular or C shaped turn would be considered short if it fits in a narrow corridor and wide if it takes up all the space from edge to edge in a large corridor. The finished or completed part can happen or not happen in both the turns above and has more to do with the final part of the shape which directly impacts the first part of the next turn, thus the commonly heard ski term, finitiation or finishiation.

For me personally in powder I either do barely shaped, as in totally unfinished short radius turns or really big slightly more shaped or completed turns, as I spend more time accelerating in the bigger radius turn and likely want a bit more speed control and have to rely on that finish to accomplish it, though rarely a full across the hill moment so that I can keep energy going into the next one.

I hope that made sense. Of course it does in my own head, lol.
 
a similar semi circular or C shaped turn would be considered short if it fits in a narrow corridor and wide if it takes up all the space from edge to edge in a large corridor.
This is an example of where language is confusing. "Narrow" and "wide" are accepted as opposites. The opposite of "short" is usually "long." So "narrow corridor" and "wide corridor" are clear descriptors. But no one talks about "short turns" versus "long turns" in ski lessons.

Certainly easier to sense when a turn is "complete" when skiing terrain and snow that allows for a wide corridor.
 
I find the term "corridor" helpful. Corridor is like a lane down the slope.

You can choose how much of the trail to take up as you ski down the hill - ski within a narrow corridor or ski within a wide corridor.

One can do completed turns while staying within a narrow corridor, but you have to work hard at it, or one can do incompleted turns in a narrow corridor which is much easier but involves higher speed.

Same for a wider corridor.

It just depends on how you want to create your turns, how much space you want to take up as you head down the hill, and the speed you want to experience.
 

Latest posts

Members online

Forum statistics

Threads
27,767
Messages
531,673
Members
9,787
Latest member
ndmb
Back
Top